MODEL 467B-30: 100VA PHANTOM LOAD

This 3 phase phantom load is used for energising either CT or Direct connected Energy meters during commissioning or routine testing. The 467B-30 can deliver over 100VA per phase at 100Amps / IV.

“Variacs” are used to adjust the current injection level from zero to full scale. Each phase has a dedicated display showing the instantaneous current level to 1 decimal place.

Shrouded safety plugs and sockets are used to connect the cables to the front panel. The input required is 240V/415V 3 phase, 4 wire and this is protected with a 3 pole circuit breaker.